/golem
Download
Doc / Getting started

The first-install check

golem

The first time your golem starts, it checks itself — and then asks you three things only you can do: play, listen, press a switch. Two minutes, once, and you know the golem works on your gear.

The first-install check

The first-install check: what the golem checked alone, then your three gestures.

The check opens by itself after the first boot, in place of the Live screen. The top lines are what the golem checked alone: the engine, the sound card, the factory content, the first preset and its files. Then come the three gestures:

  1. Plug and play — your instrument in, sound measured;
  2. Listen — the click plays on the main outputs;
  3. Press a switch — the pedalboard answers.

Skip for now always leaves. You can run the check again any time from Settings ▸ System ▸ Health ▸ Check now ▸ Inputs, output, pedalboard.

Guitar in, sound out

Plug and play: the golem listens to every input of the card at once.

Plug into any input and play. The golem watches every input of the card and keeps the one where it hears you — We hear IN 2. What is plugged in? The instrument the card already expects is pre-selected; confirm it, or tap another: guitar, bass, voice, keys, line.

While you play, it judges the input gain of your card, live, as you turn the knob:

  • low — under −24 dBFS: turn the gain up on the card;
  • good;
  • hot — over −3 dBFS, or the input clipped: turn it down.

Then Listen: the golem starts the click on the main outputs and asks whether you hear it. Then Press a switch: any switch of the pedalboard, within thirty seconds.

When something is missing

The verdict: what worked, and what to look at.

The last screen gives the verdict. Ready: sound in, sound out, the pedalboard answers — play. Otherwise it says what is missing, in the order it matters:

  • No signal came in — check the cable and the input gain, then try again: nothing else can be judged without sound in;
  • One adjustment: the input gain — everything works, the level is not right yet;
  • Sound comes in but the click was not heard — check that the monitors are on and plugged into the main output;
  • Almost ready: one thing left — the pedalboard did not answer. You can play from the screen; Try the pedalboard again replays only that gesture.

Nothing to plug in yet? Nothing to plug in — skip leaves that gesture. The golem remembers what it saw on day one: if something stops working later, Health and golem.fm know it used to work.